World
cup proven by some of the fastest athletes of the planet
Durable,
precise
and incredibly light: no shortcuts to reduce weight
World
cup proven by some of the fastest athletes of the planet
Durable,
precise
and incredibly light: no shortcuts to reduce weight
Weight: 162g.(28h-XD)
Material: special 7075TXX.
Available Drillings: 32h
Frame standard: "Rear Boost" thru-axle 148mm
Cassette standards: Sram XD-Drive, Shimano M11s or Shima M12s
Freehub system: hyper engineered front engagement featuring new 60 P.O.E
Freehub bearings & seals: 2x 6803-2RS sealed cartridges, durable polyurethane Lip seal
Hubshell bearings: 2x heavy duty 6903-2RS sealed cartridges with additional external O-r seal
Axle construction: 17mm, multi-shaped and individually lapped to micro tolerances
Bearing options: ABI Enduro 440-stainless, HDC Ceramic, XD15 Ceramic
Micro-Tuner: easy to set external bearing preload system
External sealing: polyurethane Lip seal / Soft-Touch o-ring
Finishing: black anodized body, "hart coat" sides
Graphics: laser etched
Optional: HyC HyperCeramic bearings
|
Bearing
options
|
Lacing
instructions
|
Freewheel
options
|
 |
 |
36
p.o.e. XD Drive 36
p.o.e. Shimano MTB 11s |
 |
||
 |
||
 |
Here
you will find pre-calculated
spoke lengths, spoke patterns and wheel building tips.
|
Manual
|
The
overall hub system is the world lighest but employs bigger bearings than most
competitors:
freehub mounts 2 corrosion resistant stainless bearings (6803-2rs), hubshell
rotates on 2 "heavy duty"
corrosion resistant stainless bearings (6903-2rs) that can handle 250kg each
in the worst static condition
Bigger
bearings are mounted onto axles of a bigger diameter. This creates a stiffer
assembly that significantly increases bearing durability
Our MTB hubs feature also additional external seals to keep moisture and dust
far from the 2RS bearing seals
Oversized 17mm axle is multi-shaped and individually lapped to micro tolerances
The new 60 P.O.E. freehub/floating ring mechanism has been released after 3 years of internal testing and 2 years of Open-Program tests
It further enhances engagement quickness, increases overall lifespan and simplifies maintenance
Specifically designed long-life polyurethane lip seal protects the freewheel mechanism
Micro-tuner ensures a very precise hub bearing setting, low bearing friction, higher bearing durability and no play at the rim
This external bearing preload device is very easy to set and integrates also an additional external Soft-Touch o-ring seal
Straight
pull spokes increase wheel stiffness, reducing lateral flex and increasing reactivity
of torque transmission
All this with a weight reduction too!
100% made in Italy